top of page
KMC 12 SPEED MISSINGLINK NON RE-USABLE SUPERIOR ANTI RUST PROTECTION

KMC 12 SPEED MISSINGLINK NON RE-USABLE SUPERIOR ANTI RUST PROTECTION

£11.99Price

Assembly instructions
1. Fit chain with the correct length, clean bearing and lubricate.
2. Do Not forget to lubricate the pin.
3. Insert both halves of the MissingLink into the chain ends.
4. Press both halves of the MissingLink connector together.
5. Lock in place by pulling the chain apart.
6. Opening: press both plates together while sliding the chain ends towards each other.

Important!
When you replace your chain, always use the new MissingLink which comes with your new chain. Failure to follow these instructions can lead to breakage of the chain and therefore (injury) damage.

Correct chain length
Mount the chain on the smallest sprocket and the smallest sprocket: The chain should run as close as possible to the pulley, but should not rub against the rear derailleur cage.

Details

  • Size: 1/2"x 11/128"
  • Bolt length: 5.2 mm
  • Compatible with KMC, Shimano, Campagnolo & SRAM 12-speed chains
  • Scope of delivery: 2 KMC 12NR EPT locking link
Only 1 left in stock